How to Set the Renaissance Place Address (URL) for a Receiver

Renaissance Responders and NEO 2 will no longer be supported after future software updates.

Before students can do online practice or test in MathFacts in a Flash using NEO 2s or Renaissance Responders, you must set the Renaissance Place Address (URL) for the Renaissance Receiver.

Use the Renaissance Wireless Server Utility to set the Renaissance Place Address (URL). The Renaissance Wireless Server Utility is automatically installed with NEO Manager.

Before you follow these steps, make sure NEO Manager is installed on your computer. (See the NEO 2 Quick Guide.)

  1. Start the Renaissance Wireless Server Utility. On most Windows computers, you will find it in the Start menu; in Windows 8, you will find it in the list of applications. On Macintosh computers, you will find it in the Applications folder.
  2. Select Start if necessary.
  3. Type 1234 and click OK to log in. (This is the default Administrator PIN. If you have changed the PIN, enter your new PIN.)
    1. Select the Server Settings tab.
    2. Select Set Administrator PIN.
    3. Enter the new pin.
    4. Enter the new PIN again, to confirm.
    5. Select OK.
  4. Select the Server Settings tab.
  5. Select Renaissance Place Settings.
  6. Enter the address or IP address for your Renaissance Place site. You can also enter the RP ID.
  7. This is the address that you use to go to the software in your web browser.

  8. To make sure the utility recognizes this as a valid address, click Verify. If the utility recognizes the address as valid, you will see "Verified" at the bottom of the dialog box.
  9. If the utility does not recognize the address as valid, check the format of the examples to see if you need to make any changes. You can also verify that the address matches the address identified on the Downloads page in the software. Then, click OK.

  10. When the program verifies that the settings were changed successfully, click OK again.